We manufacture our corrugated metal sheat in accordance with the European standards UNE EN-623 and EN-524, meeting the requirements set out by the CE Marking.
The CE Marking guarantees that our sleeves are designed and manufactured for use in structural applications, particularly in post-tensioning, pre-tensioning and geotechnical systems,meeting the essential requirements of:
The CE Marking is not only a legal requirement, but also a guarantee that our products comply with the required European standards, have been manufactured under certified control and are suitable.
We have a certified production control system that guarantees:
Every supply of corrugated metal ducts includes:
| Item no | Dimensiones Fleje | Denominación | Ø Interior | Ø Exterior | Manguito de Unión |
|---|---|---|---|---|---|
| VCM40 | 0,35 x 0,57mm | Vaina Ø40mm | 40 | 46 | No |
| VCM51 | 0,35 x 0,57mm | Vaina Ø51mm | 51 | 57 | Sí |
| VCM63 | 0,35 x 0,57mm | Vaina Ø63mm | 63 | 69 | Sí |
| VCM75 | 0,35 x 0,57mm | Vaina Ø75mm | 75 | 81 | Sí |
| VCM81 | 0,35 x 0,57mm | Vaina Ø81mm | 81 | 87 | Sí |
| VCM90 | 0,35 x 0,57mm | Vaina Ø90mm | 90 | 99 | Sí |
| VCM100 | 0,35 x 0,57mm | Vaina Ø100mm | 100 | 109 | Sí |
| VCM110 | 0,35 x 0,57mm | Vaina Ø110mm | 110 | 116 | No |
| VCM120 | 0,35 x 0,57mm | Vaina Ø120mm | 120 | 129 | Sí |
| VCM125 | 0,35 x 0,57mm | Vaina Ø125mm | 125 | 134 | Sí |
| VCM140 | 0,35 x 0,57mm | Vaina Ø140mm | 140 | 149 | No |
| VCM160 | 0,35 x 0,57mm | Vaina Ø160mm | 160 | 169 | No |
Corrugated metal sleeves intended for post-tensioning systems are manufactured in accordance with the following European standards:
Our corrugated metal ducts are designed for:
By marking out the supports and templates, we ensure the correct positioning of the corrugated metal ducts. We produce the designs according to the project’s requirements, clearly numbering each template to facilitate its installation.
Anchor bolts are used to create a secure connection between structural elements and the foundations (precast elements, joists, formwork, etc.). We specify their use for precast concrete structures and for fixing metal structures. The anchors transfer the force generated in the structure to the foundations or other concrete elements by anchoring them, either via straight-length anchoring (long anchor bolts) or via concrete cones (short anchor bolts).
